HomePast ArticlesMagazineNewsNewsletterAuthorsJobsVideoDirectoryTwitterBlog
Register to receive the LiDAR news Newsletter  
advertisement

eNewsletter

News

remove subscribe

LiDAR News Today


 

follow us on Twitter 

Sponsored By


TAS Lidar Content
TAS Content
Videos
Meet the Authors
Check out our fine lineup of writers. Each an expert in his or her field.
Sponsored By


Partner Sites

American Surveyor

machinecontrolonline 

lbszone.com

GISuser.com

GeoJobs.biz

GeoLearn

 

Spatial Media LLC properties

Associates

ACSM
GIA
ASPRS

web2.0

LinkedIn Group
twitter
youtube
facebook group
rss

  LiDAR News     

Discovering and Mapping Natural Hazards with LiDAR Print E-mail
Written by R. L. Smith, J. English   
Saturday, 28 July 2012

A 2.240Mb PDF of this article as it appeared in the magazine—complete with images—is available by clicking HERE

On February 17, 2011, President Obama declared a major disaster in the State of Oregon due to a severe winter storm that caused flooding, mudslides, landslides and debris flows during the previous month. Western Oregon counties including Clackamas, Clatsop, Crook, Douglas, Lincoln, and Tillamook were all affected. The total public assistance cost estimate is more than $6 million dollars.

To help mitigate events like this and maintain a safe environment for those living in the state, the Oregon Department of Geology & Mineral Industries (DOGAMI) is using light detection and ranging (LiDAR) data to more accurately find and analyze hazards like landslides and debris flow. DOGAMI also makes this LiDAR-data available to the public using an innovative solution based on Esri's ArcGIS, the standard GIS platform used in the state of Oregon.

Seeing the Hazards Through the Trees
Oregon is known for its natural beauty. From cliff-lined beaches to snow-capped mountains, the landscape has been formed into modern day eye candy from a millennia of geologic processes. With this beauty comes danger--the earth's movements that created such breathtaking views can also be the cause of destruction. Natural hazards such as floods, landslides, earthquakes, coastal erosion, volcanic eruptions and tsunamis are all possible--and have occurred in Oregon over the past century.

Maintaining an accurate inventory of these hazards can be difficult in a region that contains such lush tree cover and is inundated with more cloudy days than sunny. Traditionally, aerial photography is used to create topographic data through stereo pair analysis, but this method cannot always capture the detail needed to identify hazards locations and accurate model inputs.

When DOGAMI staff first started using LiDAR, they discovered they weren't even close to mapping the entire landslide hazard inventory of Western Oregon. "The technology has proven to be invaluable in improving the accuracy of Oregon's hazard inventories," says Rachel Lyles, GISP, a project operations manager in the Geologic Survey and Services program at DOGAMI.

LiDAR data is used to create bare earth digital elevation models (DEMs)--a representation of the earth's surface where all man-made structures and vegetation have been removed. These DEMs are much more accurate than those based off of aerial imagery. The detailed topography of LiDAR derived DEMs has greatly improved the precision of hazard mapping as well as many other mapping efforts throughout the state.

Hazard Mapping with LiDAR
In addition to landslide mapping, DOGAMI is utilizing LiDAR as the driver for new projects associated with other natural hazards throughout the state of Oregon. Coos County, OR was the first county in Oregon to receive updated approximate flood zones that used LiDAR topography to update inundation layers. DOGAMI also used LiDAR and LiDARderived products to update and correct base map layers, which greatly improved Digital Flood Insurance Rate Maps (DFIRM) both in detail and readability.

DOGAMI recently released OFR O-11-16 "Multi-Hazard and Risk Study for the Mount Hood Region, Multnomah, Clackamas, and Hood River Counties, Oregon" in order to help communities , on or near Mount Hood become more resilient to geologic hazards including volcano, landslide, flood, channel migration, and earthquakes. The study demonstrated the necessity of highresolution LiDAR data for multi-hazard mapping including locating landslides and faults and redelineating flood and volcanic mudflow hazard zones. LiDAR data are also critical for mapping assets such as buildings and infrastructure. The accuracy and fine-scale resolutions of the hazard, asset, and risk data make the results more credible and thus more likely to be useful in risk reduction.

In Oregon, DOGAMI manages the National Tsunami Hazard Mitigation Program, which has been administered by the National Oceanic and Atmospheric Administration (NOAA) since 1995. DOGAMI's work is designed to help cities, counties, and other sites in coastal areas reduce the potential for disastrous tsunami-related consequences by understanding and mitigating this geologic hazard. DOGAMI has developed a new generation of tsunami inundation maps and evacuation brochures using Esri's ArcGIS to help residents and visitors along the entire Oregon coast prepare for the next Cascadia Subduction Zone (CSZ) earthquake and tsunami. LiDAR for the Oregon coast was acquired between 2008 and 2009. The on-shore LiDAR has been integrated with off-shore and near-shore bathymetry providing greatly improved topographic inputs for tsunami modeling. With NOAA funding, DOGAMI and Oregon Health and Science University (OHSU) has worked to successfully model tsunami inundation scenarios for the entire Oregon coast. The detailed topography improved model outputs by providing greater definition and inundation accuracy. These improvements have allowed DOGAMI to better educate and inform coastal communities of the risk of tsunami hazards.

Throughout the state of Oregon local municipalities, state and federal agencies, and tribal communities have been applying LiDAR topographic data to all aspects of mapping. "One of the great things that has come from this mass of data is a coming together of users and sharing of ideas" says John English, the LiDAR database coordinator at DOGAMI. "People have found new ways to address geospatial needs; LiDAR has changed the way Oregon thinks about mapping."

LiDAR for Everyone
DOGAMI staff embarked on an ambitious project to make LiDAR data available and searchable on the web so that anyone could compare and contrast LiDAR data against aerial photographs, topographic maps, and 10 meter DEMs for their own education. In 2011, DOGAMI began using the ArcGIS Viewer for Flex to create an interactive map tool that allows anyone with a web browser to view the LiDAR data to a 1:9,028 scale. Viewers can navigate using pan and zoom, and can hide and display different data layers depending on their interests.

The primary data layers available in the viewer are the USGSTopo24k which displays USGS 1:24,000 scale quadrangle boundaries, names and Ohio codes, county and state administrative boundaries, and a contour layer. DOGAMI uses the Ohio code grid system to identify LiDAR data quadrangles. (The Ohio code grid system splits a 1" x 1" grid block into sixty-four 7.5' quadrangles. Ohio code values are derived from the geographic coordinates of the SE corner of each block and an assigned grid number, ensuring consistency across the contiguous United States.) The contour layer displays 20-foot contours and labels at scales 18,056 and 9,028.

The LiDAR data shown in the data viewer are 3 meter resolution, bare earth hillshade imagery. Users have the option to view the LiDAR data alone, or as a semi-transparent layer draped on top of other base map layers. These other basemap options are Esri's aerial, streets, and topo basemaps.

One of the most helpful tools for people not familiar with navigating an interactive map is the overview map. This index map uses the Esri street basemap and overlays a red box to indicate the extent of the primary LiDAR data viewer. Controls at the top right of the main map display allow viewers to search for and identify DOGAMI LiDAR Data Quadrangles as well as take action with other controls, such as show and hide the map legend, draw and measure on the map interface, and find and zoom to an address. The current extent of the data viewer can be printed, as well.

By using the `LiDAR Quad Search/ Purchase" tool that is available on the map, LiDAR Data Quadrangle (LDQ) publications can be located and ordered. These publications are a series of 7.5" quadrangles each containing a bare earth DEM, highest hit DEM, and a high intensity tiff image, all in Esri grid format. Viewers can search for LDQ publications based on Ohio grid or USGS topographic quadrangle name or county. If the LDQ publication exists for the area being searched, the viewer can click on the `Order Data' button or on the web link on the popup to order the data quadrangle, or quadrangles. Clicking this link will bring the viewer to the Nature of the Northwest (naturenw.org) website, which is operated by DOGAMI and the USDA Forest Service's Pacific Northwest region. The site is a one stop shop for purchasing maps, publications, books and software on the region's geologic information.

Coordinating LiDAR Collection
DOGAMI has been overseeing the collection of LiDAR throughout the state of Oregon since 2008 when the Oregon LiDAR Consortium (OLC) was formed. The OLC has been the most successful consortium model in the U.S., collecting 13.9 million acres of high density data throughout the northwest. DOGAMI continues to supervise and coordinate the collection of large swaths of LiDAR data in Oregon, as designated by the Oregon legislature. Using a nationwide selection process, DOGAMI has a state price agreement in place with Watershed Sciences Inc. of Corvallis, Oregon for a pre-determined unit cost based on the size of project areas. DOGAMI and consortium partners (which include local, state, federal, and tribal agencies) have combined interests and funding to facilitate Oregon's many LiDAR data needs. Additionally, DOGAMI uses Esri products to serve more than 33 terabytes of LiDAR data to the public for viewing and purchase using the online LiDAR Data Viewer (http://www.oregongeology.org/sub/LiDARdataviewer/index.htm).

Note: The LiDAR viewer was developed by Paul Ferro, GIS Analyst & Web Design, Oregon Department of Geology and Mineral Industries.

John English is the LiDAR Data Coordinator and Fluvial Geomorphologist for the Oregon Department of Geology & Mineral Industries (DOGAMI). Since joining DOGAMI in 2008, John has overseen the QA/QC of LiDAR data collected through the Oregon LiDAR Consortium, as well as served as principle investigator on a variety of fluvial hazard projects.

Rachel Lyles is the Project Operations Manager at the Oregon Department of Geology & Mineral Industries (DOGAMI). Rachel oversees the implementation of all GIS related projects and staff to ensure timely delivery of high quality products.

A 2.240Mb PDF of this article as it appeared in the magazine—complete with images—is available by clicking HERE

 
< Prev   Next >

 

Share this page with your favorite social networks! 

deliciousrssnewsletterlinkedinfacebooktwitter

LiDARnews Exclusive Online-only Article ticker
Featured LiDAR News Events
List Your Event Here
please
contact LiDAR

Google
 
LiDAR NEWS TOP STORY

3D LiDAR

Time Scanners
on PBS

GOT NEWS? Send To
press [at] lidarnews.com
Online Internet Content

Sponsor


White Papers
Careers

post a job
Reach our audience of Professional land surveyors and Geo-Technology professionals with your career ad. Feel free to contact us if you need additional information.

News Feeds

 
Subscribe to LiDARnews updates via friendfeed

Need Help? See this RSS Tutorial






©Spatial Media LLC - All rights reserved / Privacy Statement
Spatial Media LLC
905 W 7th St #331
Frederick MD 21701
301-620-0784
301-695-1538 - fax